Multi-Channel Detector for Wireless Protocols

TheDD1207 is a new measuring device which can be successfully used by engineers or counter surveillance specialists as a reliable tool for tracing different digital transmissions such as GSM, Bluetooth and other  \wireless transmissions. The sensitivity of a common RF detector (bug detector) is spread along a wide frequency range, usually 3, or even 6-7 GHz. This means the common detector cannot detect such weak and non-continuous signals as Bluetooth, Wi-Fi or Wi-Max. Even more powerful signals like GSM-1800 are also hard to detect because of their low sensitivity at higher frequency ranges.
The only way to reliably detect wireless protocols is to use pre-selector chips (saw filters) which attenuate all other signals except the desired ones. This is the method implemented in the Protect DD1207 which has 6 channels for different frequency ranges and can simultaneously detect 6 different kinds of transmissions at a distance much greater than any common RF detectors.

Features

Portable device for the inspection and location of wireless sources
-6 channels of detection for different kinds of protocols
-Detection of GSM/CDMA/3G
-Detection of Bluetooth/Wi-Fi/Wi-Max
-Can be used for tracing both regular sources and illegal eavesdropping
devices
-6 bar graphs with 10-segments each, for accurate location of RF sources
-4 modes: Silent, Vibration, Visual and Listen
-2 levels of sensitivity (attenuator)
-Extra display shows probable protocol
-Durable metallic body
-Microprocessor controlled
-Setup mode with selection the threshold level for vibration.
 Detects the following kinds of bugging devices:
-GSM baby-monitors/GSM alarm/GSM bugs
-GSM/GPRS/EDGE/3G video cameras
-GSM Spy phones
-GPS Trackers
-Bluetooth bugging devices
-Spy phones with Bluetooth/Wi-Fi
-Wi-Fi/Wi-Max bugging devices
-Wireless videocameras 2.4 Ghz


Specs

• Bluetooth, Wi-Fi 2400-2480
• CDMA 824-849 MHz
• Wi-Max 3000-7000 MHz
• Antenna 2 Omni-directional antennas
• Box Size 7 x 5 x 1.50
• Detection distance 1-10 meters
• Frequency range
• GSM (DCS) 1710-1790 MHz
• GSM 880-920 MHz
• operation time 10-15 hours
• power 2 AAA
• Unit Size 2.75 x 4.75 x .50
• WCDMA, 3G, GSM (PCS), DECT 1920-2000 MHz
• Weight 1.00

Includes

• 2 Antennas
• 2 Batteries size AAA
• Cleaning Cloth
• Detector
• Manual
• Screw driver

How to Install the Eblaster Mobile Cell Phone Monitoring Software

Here is a sample set of instructions for Spectorsoft's Eblaster Moblie.

From the Target phone, go into the Internet Explorer from the phone and type in m.spectorsoft.com in the url bar It will prompt you to 'click here' for blackberryor android application, and the download will start
Once the download it complete you will need to install the program, generally from Android phones you can go back to the home screen and slide your finger down from the top of the phone and this will slide down a menu screen, if not you will need to find out where the phone sends downloads so you can install the program
When you see the download for 'Mobile Logs' , click on the program and it will take you to an install screen
Click 'install' to start the installation
Once the program is installed, you will need to go to your phone screen like youre making a phone call
Dial *#4321 and click send, once dialed it will automatically take you to the eBlaster Mobile program
Read and Accept the terms, then it will ask you for the Serial #

9990MO0022208451

Then just follow the prompts for the complete setup
You will be able to set up your email address, password(to get back into the program if you need to make changes), what you want sent to the email address and how often you want it sent
The link below is if you want to register the program, you dont have to but it helps if you ever have any problems with the program

http://www.spectorsoft.com/support/WebRegistration.asp?snum=9990MO0022208451

From star to finish the whole process takes about 5 minutes with the target phone, but once programmed the

eBlaster Mobile allows you to monitor the activity of an Android mobile device. This is appropriate for parents monitoring a phone given to their children or employers monitoring a phone provided to their employee.
eBlaster Mobile recordings are organized into an easy-to-read Activity Report that is automatically sent to any email address you choose... as often as every 30 minutes or as infrequently as once a day.
You can also set up virtual fences around key locations and be notified when they enter or leave these important places.
eBlaster Mobile Instant Notification keeps you "in-the-know" by automatically sending you an exact copy of every text message sent and received, and a thumbnail of every photo snapped, even if the messages or images were deleted from the phone.


SMS/Text Messages
Get transcripts of text message conversations – every word that was typed on both sides of the conversation. Know who said what to whom and when.
Web History
Review the address of EVERY website they visit. Find out if children or employees are visiting inappropriate websites and how frequently they are visited. Know if they are spending all day surfing when they should be doing something else.
Location
Find out where children or employees are and when they were there by using the GPS or cell site location of the phone. Did they really go where they said they were going, or did they stop someplace else?
Call Logs
See when and who children or employees are calling and for how long. Find out if people are talking on the phone at inappropriate times, or determine if they are making too many improper phone calls

The Druid Noise Generator

Protect your conversations against all kinds of eavesdropping!
Top-of-the-line protection system. This is the only device in the world which can give 100% protection to your conversations against interception or recording. The DRUID NG5000 creates powerful interference against all kinds of listening devices! Even if a person is standing next to the participants, they will not be able to understand what is being said. The headsets allow the users to hear each other clearly while the DRUID's central unit produces interference.  Powered from 110V or the internal rechargeable battery with a resource time of 2-4 hours.  The unit is supplied in a carry case.
Not all listening devices can be detected by existing methods. TheDRUID NG5000 is a unique system for providing protection of human's speech.
Remotely controlled radio microphones, wired microphones, passive resonators, miniature voice recorders  practically all these devices cannot be detected by conventional methods. Even a modern cellular phone may contain a digital voice recorder; this means that any phone lying on the desktop could be used by an adversary to record a conversation. Therefore it is extremely important to have a reliable device protecting private conversations, not depending on their level of importance. The concept of the DRUID is based on generating audio interference produced simultaneously with a human's speech. The volume of this interference is higher than a person's voice; therefore neither listening device nor recorder is able to pick it up. The generated audio interference cannot be cleared by any noise-clearance- methods. At the same time the produced interference does not create any inconvenience to the participants of the negotiation thanks to the special headsets. The DRUID headset allows users to hear each other with crystal clear quality.

Features
Professional system for protecting speech between up to 6 persons
Protects against all known methods of listening, including all types of radio microphones, stethoscopes, voice recorders, passive resonators, wired microphones, etc.
The system uses usual multimedia headsets. 4 headsets PLANTRONICS AUDIO 355 included in the standard set
Absolutely harmless to your health: no microwave reflections or ultrahigh sound noise
Compared to a white-noise generator the DRUID provides a much higher level of protection.
The system is portable: supplied in a plastic carry-case it can be easily prepared for use.
Powered from an internal rechargeable battery the DRUID D-06 can work for up to 4 hours without mains supply
The system can be used in any situation, it is especially valuable when conducting highly important negotiations in an unknown environment

Specs

• Dimensions 23 x 6.5 x17 cm
• Power source AC 110V Rechargeable battery
• Type of noise Distortion plus Reverberation

Includes

• Generator
• 4 headsets
• Sponges for headsets
• Power charger 110V
• Manual

AC Adapter Hidden Camera

It may look like a regular everyday AC adapter plugged into the wall, but it is much more!

This high-grade covert camera has a DVR built right into the unit, and is motion activated! To operate, simply insert an SD card, and plug it into any working electrical AC outlet, and the camera instantly starts recording as soon as motion is detected! 

Since the unit runs off AC power, there are no battery life concerns! Just plug it in, and let it record! When you are ready to retrieve the video, just remove the SD card, and you can play back the files on your PC, we recommend VLC Media Player.

Note : AC Adapter DOES NOT work as a a power source
 
Features
 • Normal looking AC adapter
• Built in DVR and camera
• Time/Date Video Stamp
• Powered by AC outlet - no batteries needed!
• Amazing 720x480 resolution @ 30fps
• Takes up to a 32GB SD card
• 1 hr per GB recording
Specs
 Image Sensor: 1/4" CMOS camera lens
Resolution: 720x480 NTSC
Time/Date Stamp: YES
Focal Lens: 4.3mm
Angle of View: 78 degrees
Min LUX: 0.5LUX @ F2.0
Recording Resolution: 720x480 @ 30fps
Video Format: MPEG 4 AVI
Recording Mode: Motion Detection or Continuous Recording
Memory Type: SD card
Max SD Card Size: 32GB
PC Interface: Mini USB 2.0
Size: 2.51" x 2.04" x 1.96"
Weight: 3.8oz

The difference between Cat6 and Rg59

Coaxial cables, commonly called ‘coax’, are the cables that are commonly used for video and satellites installations. There are many kinds of cables to suit different applications, among which are the RG59 and RG6. The main difference between the two is their construction as the RG6 is bigger compared to the RG59. The inner conductor core of the RG6 cable is thicker as well as the shielding within the rubber sheath.

The difference between the two, in terms of construction, results in a better frequency range for the RG6 cable. RG6 cables are often certified to work up to 3Ghz. Although RG59 cables may work above the 2Ghz level, it is not always the case and problems may still appear later as the conditions change. Another key difference is the much lower attenuation of RG6 cables. With very long lengths of cable, the attenuation can degrade the signal to a point where it becomes noticeable. Using an RG6 cable simply means that you are able to use longer cables before you have problems with attenuation.

A downside to the RG6 cable is when it is used for applications operate below 50Mhz. A good example of this is HDTV, which only operates at around 37Mhz. The shielding of RG6 cables cannot properly prevent noise at levels of below 50Mhz and the signal may be worse with an RG6 cable than with an RG56.

Because of these differences, each of these two cables are often used for specific purposes despite being interchangeable. RG6 is the cable of choice for satellite receivers because it allows for better signal quality as well as insurance that any future specification that could use frequencies close to 3Ghz would still be compatible with the current wiring. RG59 is used for video signals as it would provide the best signal quality for the frequencies in use. Not to mention the cheaper price per length of RG59 cables compared to RG6 cables.

Summary:
1. RG6 cable has a thicker conductor than the RG59
2. RG6 cable has better insulation than the RG59
3. RG6 can carry signals of much higher frequencies than the RG59
4. RG6 has much lower signal losses compared to the RG59
5. RG6 cable may not operate below 50Mhz while the RG59 can
6. RG6 is better for satellite signals while RG59 is better for video signals
7. RG6 cables cost more than RG59

C800 Wireless Pinhole Camera and Receiver

Easy set up and portability this tiny wireless color camera transmits a distance of approximately 300 feet(LOS-plain line of sight)! The receiver is more than just your average wireless receiver it is also a DVR. Packed with features, motion detection, easy operation, and video storage on an SD card that can record up to 6 hours! This camera great for covert operations, nanny cams, room surveillance etc.

 Specifications:

•	1/3 CMOS color camera
•	Wireless Receiver / DVR uses up to 2GB SD card
•	Motion detection
•	Approximately 300 feet LOS
•	0.5 LUX
•	420 TV lines resolution
•	Recording time:
•	Up to 6 hours recording on a 2GB card
•	Weight:
•	Camera: 1.0 oz
•	Receiver: 6.2 ozs

Includes:

•	Wireless camera
•	Wireless Receiver
•	Antenna for receiver
•	2 AC Adapters
•	Av cable
•	Stand / mounting bracket for camera
•	Manual

Cell Phone and GPS Detector

This counter surveillance device is ideal for tracking down regular or concealed GSM mobile devices. Find and detect concealed transmitting cellular devices quickly and easily in GSM, CDMA, and WCDMA transmission ranges.

Specifications:

•	Detection Mode: RF Power Peak Detection
•	Detection Frequencies: GSM 880-915MHz, CDMA 824-849MHz, WCDMA (1920-1980MHz), and DCS (1710-1785MHz)
•	Antenna: Dual band dipole omni-directional
•	Power: Li-battery (single, 1800mAh @ 3.7VDC)
•	Alert: Vibration and audible
•	Operation Time: 18-20 hours (on a single charge)
•	Weight: 110grams
•	Size: 96mm x 60mm x 24mm (120mm w/ antenna)

Includes:

•	Cell Phone and GPS Detector
•	Li-ion Rechargeable Battery
•	AC Power Charger
•	Earphone